The Data Card Interface module provides an interface between PCM/CIA air cards and the chassis system. The front panel of the DCI Module provides one industry standard PCMCIA socket and LED’s to report status conditions. The module provides a communicatio
Shielded version of the Data Card Interface for PCMCIA cards with RF Shield cover and external antenna connector. Clamshell design allows access to air card without removal of the module from the chassis.
The GPS/Timebase module interfaces to an internal or external GPS receiver and supplies the 9.6 MHz reference clock to the other modules as well as the latitude and longitude data that is recorded into the Invex3G log file.
The GPS/Timebase module interfaces to an internal or external GPS receiver and supplies the 9.6 MHz reference clock to the other modules as well as the latitude and longitude data that is recorded into the Invex3G log file. The 12 channel receiver in the
ASR Modem modules are used to place and receive telephone calls over standard wired phone lines and send and receive reference audio for MOS and PESQ voice quality testing. Modem with Housing and cable -US/ROW version.
ASR Modem modules are used to place and receive telephone calls over standard wired phone lines and send and receive reference audio for MOS and PESQ voice quality testing. Modem with Housing and cable - European version.
The GWMP0M07 hardware configuration is designed to hold up to 7 ASR modems for use as an Audio Source and Record Fixed End system. This passive chassis employs a 12.4 inch width card frame with a rack unit height of 4U. The card frame and housing are inte
The GWMP0P05 hardware configuration is designed to accept 5 Isolation modules totaling 8 inches in width. The chassis is passive without a backplane or power supply as power is directly supplied to the individual Isolation modules by the Invex3G Communica
The GWMP0P07 hardware configuration is designed to accept 7 Isolation modules totaling 11.2 inches in width. The chassis is passive without a backplane or power supply as power is directly supplied to the individual Isolation modules by the Invex3G Commun
The GWMP0P10 hardware configuration is designed to accept 10 Isolation modules totaling 16 inches in width. The chassis is passive without a backplane or power supply as power is directly supplied to the individual Isolation modules by the Invex3G Communi
The GWMP0P10rm is the rack mount version of the GWMP0P10. This chassis is designed to mount in a standard 19 inch rack and has no handles or feet. All specifications are the same as the GWMP0P10 except that the GWMP0P10rm has a width of 19 inches.
The GWMP4000 hardware configuration is designed for use with RSSI receivers as a planning solution or as a fixed-end chassis connected to ASR modems. The chassis is also capable of supporting air cards in DCI modules. This chassis employs a 5.6 inch width
The GWMP4200 hardware configuration is primarily designed for optimization applications. This chassis employs a 12.6 inch width card frame with a rack unit height of 3U and supports up to 4 CI, DCI, or RSSI receiver modules as well as two digital receiver
The GWMP8000 hardware configuration is designed for use where a large number of devices are required but digital receivers are not required. This chassis employs an 8.6 inch width card frame with a rack unit height of 3U and supports up to 8 CI, DCI, or
The GWMP8200 hardware configuration is primarily designed for benchmark applications but can also be used for optimization when a large number of devices are required. This chassis employs a 17 inch width card frame with a rack unit height of 3U and suppo
The GWMP8201 is the rack mount version of the GWMP 8200. This chassis is designed to mount in a standard 19 inch rack and has no handles or feet. All specifications are the same as the GWMP8200 except that the GWMP8201 has a width of 19 inches.